Tulikivi Control Fixing Panel

Mounting Safety for Tulikivi Control Fixing Panel

Tulikivi Control Fixing Panel is made of natural asp material and can be colored, varnished or painted according to your needs. There is a hole for the connection cable at the bottom. If necessary, you can drill a new hole with an 8 mm diameter drill bit.

1. Panel Assembly

Fix the panel to a suitable surface with two screws.

2. Remove the Mounting Kragen

Important: Infällningskragen must not be used on surface-mounted panels. You must therefore remove it.

3. Apply the Adhesive

Carefully apply the adhesive on the outermost groove in the adhesive area of the panel. This will ensure that the control unit is held firmly in place.

4. Pull the Connection Cables and Place Your Unit

Pull the connection cable from the bottom of the panel and replace the control unit on the panel.